Set Router Port Address/Label and Save Settings

April 25, 2012 – Day 7 at Auza.NET Summer Training

Auza.NET Summer Training

Linux Hangout: The Free software revolution

Exploring Linux Operating Systems

Set Router Port Address/Label and Save Settings

LAB Topology 2

Lab requirements:

1. On the router ports set IP addresses on each port:

a. Fastethernet 0/0 – 192.168.1.1 255.255.255.0

b. Serial 0/0 – 10.10.10.1 255.255.255.252

2. Set the router prompt message/banner to: Welcome to Auzanet_Router Training Center Lab

3. Set the router serial port prompt message to ***Connected to Auzanet_Router***

4. Save the Settings

Lab Process:

Router>en

Router#config terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int fastEthernet 0/0 ENABLING THE FASTETHERNET PORT

Router(config-if)#ip address 192.168.1.1 255.255.255.0 SET IP ADDRESS OF THE FASTETHERNET PORT

Router(config-if)#no shutdown ACTIVATE THE INTERFACE

*Mar 1 00:08:14.393: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up

Router(config)#interface serial 0/0 ENABLING THE SERIAL PORT

Router(config-if)#ip address 10.10.10.1 255.255.255.252 SET IP ADDRESS OF THE SERIAL PORT

Router(config-if)#description ***Connected to Auzanet_Router*** SET PORT DESCRIPTION

Router(config-if)#no shutdown ACTIVATE THE INTERFACE

Router(config-if)#exit

Router(config)#banner motd @ Welcome to Auzanet_Router Training Center Lab @ SET THE LOGIN GREETING

Router#copy running-config startup-config SAVE THE SETTINGS

Destination filename [startup-config]?

Building configuration...

[OK]

Router#wr SAVE THE SETTINGS

Building configuration...

Router#